Make a wooden rubber band powered vehicle and use it for your technology project or science project. Participate your dragster in a race with other students who have made a similar race car. Suitable for Ages 8 & Older.

The motor and propeller work together to create air current and push the car forward.

This kit includes materials and instructions for a basic solar car. Students may substitute some materials or change the design based on their own creativity. (May be different from the picture shown).

Build a wooden air propelled water craft and use it for your technology project or science project. Participate in a race with other students who have made a similar craft. It can be tested in a water way less than 1" deep. As a science project you may study the effect of propeller size on the speed. The propeller is made of plastic, so you can cut it to any size you like. Includes the wooden parts, Styrofoam, propeller, and rubber band. Ships in 7 days.

This set contains the essential materials used in construction of a simple electric circuit with a small electric motor, a switch and a battery. This kit is also used to make an air propelled motor boat known as Car-Boat or Carboat.

This kit includes one electric motor, battery holder for 2 AA batteries, one simple switch, 2 propellers, 4 wheels, 2 axle dowels, 4 small screws, 2 plastic straws and 2 connection wires. It does not include styrofoam, paint and white glue.

The Hydro Racer is a Battery Powered Hydroplane.
Suitable for Ages 9 & Older.

Polycrystaline Epoxy Resin solar panel with 0.6 watt output, used for solar energy science experiments, solar cars, solar robots and solar chargers.

Size: 60 mm x 80 mm

Output Voltage 1.5 Volts
Output Current 400 mA

Constructing a wooden electric generator is one of the best ways to learn the principles of electric generators. Completed kit is about 4 inches long and 2 inches wide. The wood dowel axle is about 4 inches long.

Plastic wheels and axles for construction of model vehicles. Back wheels are 17mm wide and 40mm in diameter. The diameter increases to 42mm with traction band or 50mm with black ring tires. The front wheel is 5mm wide and 35mm in diameter. The axle rod is 76mm long and 3mm diameter.

Comes in sets and packs. Each set includes 2 front wheels, 2 back wheels and 2 axle rods. Choose from the variations for the 2 back wheels; plain, amber traction tape or black ring tires.

The younger members of your family will enjoy some racing fun with the Rubber Racer! Its robust design has a unique die-cut puzzle piece construction that can be assembled in minutes using a hot glue gun.

Build a Stealth flyer (model airplane) and use it in a race, as a technology project or as a science project.

Build a space explorer model and test it outdoors.
The plastic propeller in this model is powered by a rubber band. Ages 8 and up. Adult supervision required. Reach for the stars with the Space Explorer, an exciting outdoor flyer. Kit includes laser cut wood parts, rubber band, stickers, propeller, and metallic streamer.

Using two motor generators, a simple switch, a lamp and a battery you will make two simple electric circuits and show how a motor converts electrical energy to mechanical energy and then a generator converts the mechanical energy back to electrical energy.

Perfect kit for science fairs, home activities, summer camps, and scouting groups. Materials in this kit may be used for many other educational projects as well.

Air Swimmers swim through the air with incredibly smooth and life-like swimming motion. These amazing fish provide hours of remote control indoor fun in even the smallest of rooms. They require only four AAA batteries (one in the body, three in the controller) and have complete up, down and 360 degree turning control. These fish are remote infra-red controlled and will respond to your inputs moving up and down most importantly left to right with fish like tail movement. Remote control has never come to life so magically! Requires helium to inflate (not included); stays inflated up to two weeks, can be re-inflated. Requires four AAA batteries (not included). IR remote control works up to 40 feet. Assembly required. For indoor use only. Measures 57" x 36".

An toy grade telescope for stargazers everywhere. Complete with 13.5-inch tripod, 25-inch finder scope, and powerful 45 x 40-millimeter lens. Lens Cap included. Each piece in window box packaging.

Air Swimmers swim through the air with incredibly smooth and life-like swimming motion. These amazing fish provide hours of remote control indoor fun in even the smallest of rooms. They require only four AAA batteries (one in the body, three in the controller) and have complete up, down and 360 degree turning control. These fish are remote infra-red controlled and will respond to your inputs moving up and down most importantly left to right with fish like tail movement. Remote control has never come to life so magically! Requires helium to inflate (not included); stays inflated up to two weeks, can be re-inflated. Requires four AAA batteries (not included). IR remote control works up to 40 feet. Assembly required. For indoor use only. Measures 57" x 36".

Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to analyze. Discovering the concepts of floatation, thrust, velocity, torque and many others was never so much fun!

This telescope set is out of sight! Package includes three lenses (20X, 30X, 40X), tripod, and diagonal mirror. Each set in printed box.

Discover the gravity defying effects of magnetism through experiments in equilibrium, gravity, and magnetic fields. Then build a Magnetic Levitation Train with this kit.

If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE.

Pneumatics is a branch of technology, which deals with the use of pressurized gas to affect mechanical motion. In this project you will make a mechanical lift using two syringes. One used to create pressurized air and the other used to create a mechanical movement and lifting a load.
The set contains 19 pieces of pre-cut woods, two syringes, rubber rings, plastic tubing, eye screws and one plastic clamp.
You will need wood glue to complete your pneumatic lift.

This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts and instructions are included.

These plastic pulleys have deep V-groves and are mounted on a metal frame with two end hooks.

A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding the string around the axle the mousetrap’s spring is stretched and now you have your stored energy. As the mousetrap car is released the mousetrap pulls the string off of the axle causing the wheels to turn and off the vehicle goes.

Solar Cells also called photovoltaic cells are finding their way into thousands of uses world wide.  This kit is an economical introduction to photovoltaics, also known as PV.

This simple car kit explores movement, electricity and forces. All parts and instructions are included.