The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect.

The key component is the Peltier module that will be sandwiched between the two metal cans. As long as there is a substantial temperature differential between the two sides of the Peltier element, sufficient electricity will be generated to power the electric motor to turn the propeller.

With easy-to-follow instructions, assembling this kit is a breeze.

Thermoelectric Cooler has two sides. When connected to a battery or any other source of direct current, one side becomes ice cold and the other side becomes hot. You can switch the hot and cold surfaces by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink cooler/ refrigerator.

Specifications:
Operation voltage: 0~15.2V DC
Operation current: 0~6A
Operation Temperature: -30°C to 70°C
Max power consumption: 60 Watts
Size: 40mm x 40mm x 4mm
No marking

These devices must be used in conjunction with a heat sink to avoid burning. Each device is fully inspected and tested.

Fitted with 6-inch insulated leads.

Demonstrate the direct conversion of heat to electrical energy.

Thermoelectric generator module, for converting heat to electricity.
Open-circuit voltage 8V,
Maximum load voltage 4.8V,
Maximum load current 600MA,
Δ T 100 degree,
measurement 40 ~ 40 ~ 3.8

The actual product may not have any marking or have a different marking. The positive wire is red.

Stainless steel 5" probe measures from 25 degrees to 125 degrees Fahrenheit. Temperatures are shown on a dial display. Includes protective sleeve with pocket clip.
DIALTS25125F: Dial Thermometer Small 25 - 125 F