E10B26 is the second most widely used metal lamp base. In addition to its wide use in hobby, craft and education, it is also used as a main component or center piece of many plastic lamp holders.
The wings that also serve as contacts are smaller than E10B31 model, but they also have one extra hole that may be used as contact or as a mounting hole.
The overall length is 28 mm. It is about 10 mm wide and 13 mm high.
E10B26 lamp stands simplify connections while making multi lamp circuits in series or parallel.
E10B26 lamp base is for low voltage applications. It is not recommended for applications that require more than 24 Volts.
This miniature light socket or lampholder is perfect for that electronics
idea or science project. This lamp holder features a rolled shell of brass
mounted in a porcelain base with two screw terminals and two pre-drilled holes to
mount to a project board. The base diameter is 1 1/4" and the height is
7/8". It holds our 1.2-volt,
2.25-volt
and 5.1-volt light bulbs.
Used as receptacle for miniature lamp (LAMP HOLDER)
Does not include the manufacturer’s marking or label.Replaces our original porcelain lampholders.
Open bulb miniature socket (lampholder).
Consists of a 53mm diameter plastic base with two plated brass Fahnstock clips for connecting wires to a miniature lamp bulb holder.
This miniature light socket or lampholder is perfect for that electronics idea or science project. This lamp holder features a rolled shell of brass mounted in a base with two screw terminals and two pre-drilled holes to mount to a project board. The base diameter is 1 1/6" (30mm) and the height is 3/4" (18mm). It holds our 1.2-volt,
2.25-volt
and 5.1-volt light bulbs.
Used as receptacle for miniature lamp (LAMP HOLDER)
This set includes ten SSSBULB miniature lamps (light bulbs) and five matching lampholders (miniature bases).The lamp holders are compatible with any size SSSBULB lightbulb.
This metal lamp stand is mainly designed for installation on circuit boards and bread boars. It has two contact pins (similar to ICs) that can be inserted and soldered.
The small pin shape contacts also make this a favorite choice for craft workers who need to install a number of these lamp bases very close to each other. E10B29 lamp bases can be installed very close to each other or may even touch each other if needed.
The diameter is about 10 mm and the height is about 20 mm. The distance between the legs may be 9 to 11 mm.
Due to a more delicate and complex design, E10B29 lamp holders are not recommended for beginners or young students.
Overall benefits of E10B29 lamp bases include small foot print, high heat resistance, simple design, mountable on circuit boards.
This is a widely used lamp base for 6-V up to 24-V light bulbs installed on cardboard, light wood, plastics and metal surfaces.
The screw base in E10B21 lamp bases are elevated to prevent short circuit when installed on metal surfaces and keeps away the heat when mounted on cardboard or light wood surfaces. If you intend to install the lamp holder under the hood of a car or inside a metal cabinet, then E10B21 lamp bases may be your best choice.
The legs have rivet/screw holes used for easy mounting while they are also the negative contacts of the lamp base. Another smaller contact between the two legs is used to connect the positive wire.
This lamp holder matches all of our miniature lamps.
E10B21 lamp base is for low voltage applications. It is not recommended for applications that require more than 24 Volts.
This bulb base or socket is a simple design metal lampholder made for educational activities and craft projects. It has two screw holes that may be used to mount the lampholder and/or as contacts.
Easy to understand and use for making multi-lamp circuits in a series or parallel arrangements.
The super low cost and small footprint of this lamp holder makes it the perfect choice for science projects, technology projects, craft projects and school activities.
This standard lamp socket is available in Black or White, this miniature light socket or lampholder is perfect for that electronics
idea or science project. This lamp holder features a rolled shell of nickel plated brass mounted on a base with two screw terminals and two pre-drilled holes to mount to a project board. The base diameter is 30mm and the height is 18mm. It holds our 1.2-volt,
2.25-volt
and 5.1-volt light bulbs.
Used as receptacle for miniature lamp (LAMP HOLDER)