|
Metal Electrodes, Set of 8 |
|
For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and Magnesium.
WARNING: Metal electrodes have sharp edges. Not a toy!. Handle with care.
|
| Product Code: METELECT8
|
$12.00 & Up
|
|
|
|
|
Watch Glasses (Pack of 12) |
|
Clear watch glasses are used for weighing and drying small amounts of material. These watch glasses are perfect for science project displays where you need to display minerals, insects, crystals and many other materials.
|
| Product Code: GLWATCH
|
$16.00 & Up
|
|
|
|
|
Blunt Fill Needle, 1.5 inch |
|
Filling needles may be attached to any standard syringe and be used for high precision transfer of liquids. These needles are not very sharp and may not be used for medical applications. Each needle comes with a protective jacket. Individually wrapped.
|
| Product Code: FN37
|
$0.47 & Up
|
|
|
|
|
ELECTRODE PAIR, CARBON, SPARE |
|
For use with Hoffman Electrolysis Apparatus described above. Size (l x d), 100 x 5mm. Inserted in a rubber stopper with insulated lead wire.
|
| Product Code: 3155C
|
$7.00
|
|
|
|
|
Portable pen type pH meter |
|
Portable pocket size pH meter with Automatic temperature compensation, Reliable and stable, High accuracy with 0.01 pH resolution, Low cost,
Easy operation, Easy to carry.
|
| Product Code: PH009II
|
$28.00 & Up
Special Order!
|
|
|
|
|
Clamp Holder, Right Angle (Bosshead) |
|
For connecting two rods at right angles forming L or T shape.
Made of die-cast zinc alloy with plated brass thumbscrews. It can accept or be clamped to rods up to 18 mm diameter. This right-angle clamp or clamp holder is mainly used to connect different clamps to the vertical rod of a stand. This clamp can break by excessive force on screw.
|
| Product Code: AS2063-01
|
$4.90 & Up
|
|
|
|
|
|
|
Timer |
|
Desktop 60-minute timer used for laboratory, research and exercise timing. Simple design and low cost. Available in wholesale and retail.
|
| Product Code: TMR
|
$2.50 & Up
|
|
|
|
|
|
|
Rectangular Cast Iron Support Stand |
|
This support stand has a rugged, stable base. The base is rectangular,
has a baked enamel finish with an undercoating on the bottom and has a
hole drilled close to the edge for the rod. This support is supplied with a
rod that can easily be unscrewed from the base for storage. This quality
support stand is great for your home or professional laboratory.
|
| Product Code: SUPST
|
$15.00
Special Order!
|
|
|
|
|
Plastic Beakers, Griffin style |
|
Single piece, molded of translucent Polypropylene plastic, with raised numerical graduations on the outside. Resistant to most common acids, bases and solvents. Has a broad base for stability. All sizes have pouring spouts. Does not have meniscus. Autoclavable to 130 degrees C. Available in 50ml, 100ml, 200ml, 500ml & 1000ml.
|
| Product Code: PBEAKER1
|
$1.59 & Up
|
|
|
|
|
Molecular Model Set |
|
Molecular model set for constructing molecular models. Consists of 120 pieces (including 25 large balls, 24 small balls, 26 white balls with connection rods and 40 connection rods.) Balls barry in the number and the position of the holes so that you can use them for different atoms in different molecules. Also available in 60 ball set.
|
| Product Code: MOL120
|
$16.00 & Up
|
|
|
|
|
Safety Glasses (Goggles) |
|
Safety goggles protect the eye area in order to prevent particulates or chemicals from striking the eyes.
Used in chemistry laboratories and in woodworking. Hard plastic with color frame and temples. Adjustable arms. |
| Product Code: GOGGLE0
|
$2.25 & Up
|
|
|
|
|
Plastic Beakers, Set of 3 |
|
Set of 3 beakers molded of translucent Polypropylene plastic, with raised numerical graduations on the outside. Resistant to most common acids, bases and solvents. Has a broad base for stability. All sizes have pouring spouts. Does not have meniscus. Autoclavable to 130 degrees C. This set includes 250ml, 500ml, and 1000ml beakers.
|
| Product Code: PBEAKERS3
|
$6.50 & Up
|
|
|
|
|
|
|
|
|
|
|
Chattaway Spatula, 8" |
|
Simple, but effective. The Chattaway-pattern Spatula has an enduring design.
|
| Product Code: SPC8
|
$2.00 & Up
|
|
|
|
|
Plastic Pipette, Graduated |
|
Sizes from 1 mL to 25 mL have unique smooth one-piece construction. There are no seams at the mouthpiece or tip ends, thus no possibility of sample hang-up or accidental breakage due to an irregularity or weakness. One-piece construction pipette also provides improved accuracy with calibration to deliver at ±1.5%.
Sterile, Individually Wrapped.
|
| Product Code: PS_PIPETTE
|
$0.65 & Up
|
|
|
|
|
|
|
Pen Type pH meter |
|
Portable pocket size pH meter with automatic temperature compensation. Reliable, stable, low cost, simple operation and easy to carry.
|
| Product Code: PH009IA
|
$29.00
Special Order!
|
|
|
|
|
Spatula Spoon, Double Ended, 6" S.S. |
|
Stainless steel spatula with spoon, 6" long for handling chemicals and laboratory use. One end is a flat spatula and the other bent into a spoon form. Wholesale discounts or quantity discounts are available for schools and resellers.
|
| Product Code: SPSP6
|
$0.95 & Up
|
|
|
|
|
Micro Spatula Spoon, 6" |
|
Double End micro spatula and spoon made of stainless steel metal for general laboratory use and handling small quantity chemicals. about 6 inches (150 mm)long.
|
| Product Code: MSPSP6
|
$0.70 & Up
|
|
|
|
|
Retort Clamp, 4 prongs |
|
Retort Clamp or universal clamp, Cross pattern, 4 prongs, cork lined jaws, 24 cm long, 7.5mm D Rod, Made of Zinc alloy, Painted Black. A retort clamp is used to attach other aparatus, such as flasks, burettes and test tubes, to a retort stand. Can hold 5mm up to 65 mm objects.
|
| Product Code: RETCLMP4P
|
$6.95 & Up
|
|
|
|
|
Laboratory Scoop, (Chemical Scoop) |
|
Stainless steel laboratory scoop for scooping of chemicals from bottles etc.. Has semicircular cross section with one pointed end and one blunt end. Length about 165mm (6/ in). Without handle.
|
| Product Code: SCOOP165
|
$1.10 & Up
|
|
|
|
|
HOFFMAN ELECTROLYSIS APPARATUS |
|
For qualitative and quantitative study of the electrolytic decomposition of electrolytes such as water, hydrochloric acid etc. Consists of two vertical 50mL, gas-collecting, graduated glass tubes with stopcocks at top and joined by a bridging tube to a reservoir. Works with matching graphite electrodes or platinum electrodes that may be fitted at the lower ends of the glass tubes. Packed in a styrofoam case. Mounted on a cast iron stand designed for safe clamping. Requires a 6V battery or low voltage D.C. power supply for operation.
|
| Product Code: 3155A
|
$39.00 & Up
|
|
|
|
|
|
|
Test Tube Clamp, Wooden |
|
This wooden clamp can be used for tubes from 10mm to 19mm.
With a steel spring. Jaws open by thumb pressure.
Smooth finish.
Length is about 180mm
|
| Product Code: US2031
|
$0.95 & Up
|
|
|
|
|
Burette Clamp |
|
"V"- Jaw.
Plastic coated, aluminum clamp. The V-Jaw will rotate and lock in any position.
|
| Product Code: GSG78
|
$6.04 & Up
|
|
|
|
|
Fine Tip, Curved Forceps |
|
These fine tip, curved forceps are perfect for precise dissection work. They are made of stainless steel and have serrated tips and corrugated sides.These forceps would be a great addition to any dissection kit.
|
| Product Code: FORCEP
|
$2.95 & Up
|
|
|
|
|
Vernier Caliper, Metric, plastic |
|
This Vernier Caliper is for inside and outside measurement in metric system with precision of 0.05mm. It is ideal for learning precision measurement techniques
by using the vernier principle. |
| Product Code: CALIPER_MP
|
$6.50
|
|
|
|
|
Clamp Holder, Right Angle |
|
CLAMPH1 is a right angle clamp holder for connecting two rods up to 3/4" in diameter at right angles forming L or T shape. CLAMPH1 is made of die-cast alloy with plated brass thumbscrews. It can be clamped to rods up to 18mm diameter. |
| Product Code: CLAMPH1
|
$7.00
|
|
|
|
|
Brush for test tubes |
|
Test tube brush is available in 3 different sizes. |
| Product Code: US2080_1
|
$1.00 & Up
|
|
|
|
|
Teclu Bunsen Burner |
|
This more advanced Teclu Burner can be used for obtaining a very hot flame. It is suitable for glass work and soldering.
|
| Product Code: BUNBURNTEC
|
$16.00
|
|
|
|
|
TEASING NEEDLES |
|
For student dissection work. With wooden handle. Overall length approximately 130mm. Sharp points. Select from the pack of 12 or pack of 100.
|
| Product Code: 1080
|
$0.28 & Up
|
|
|
|
|
Forceps |
|
Forceps, plastic, Self sprung, 5.2" (130mm) long. Blue opaque with pointed end. Made of styrenic ABS.
|
| Product Code: EG1129B
|
$0.37 & Up
|
|
|
|
|
Calorimeter (Includes Glass Alcohol Thermometer) |
|
This Calorimeter Set is designed for determining specific heat, heat of
fusion and heat of vaporization. The set consists of two polished spun
aluminum vessels, i.e. an inner calorimeter, 80 x 65 mm (height x diameter) and
an outer calorimeter, 140 x 100 mm (height x diameter).
|
| Product Code: CALMETGA
|
$21.57
|
|
|
|
|
Crucible Tongs |
|
These Crucible Tongs are used for handling or manipulating hot crucibles and
similar apparatus. They have corrugated tips for easy handling and a
riveted joint. The finger openings are large enough for a firm grip and
the overall length is about 200 mm. These crucible tongs find great use in
either the home or professional lab where handling hot apparatus is required.
|
| Product Code: CRUCTONG
|
$5.00 & Up
|
|
|
|
|
ALCOHOL BURNER |
|
Permanent wick, no replacements needed. Tank capacity 100ml suffiecient for 1 1/2 hours use.
|
| Product Code: 5456
|
$15.75
Special Order!
|
|
|
|
|
TRIPOD STANDS, SINGLE RING |
|
For supporting small objects over a burner such as crucibles, evaporating dishes etc.
Consists of a hammertone finished cast iron circular ring diameter 100mm (4in), with three threaded and detachable plated legs which are sloped outward for stability. Shipped unassembled.
|
| Product Code: 2056
|
$6.80 & Up
|
|
|
|
|
Rubber Tubing |
|
High Grade, Medium Wall rubber tubing for general laboratory use. Available in rolls of 3 meters (10 feet)
|
| Product Code: RTUBE
|
$3.75 & Up
|
|
|
|
|
Desktop Analog Multimeter |
|
AMM360 is a desktop analog multitester for measuring DC Volt, AC Volt, DC
Current and Resistance. AMM360 can be used as a very sensitive galvanometer and
can show as low as 0.01 DC voltage. AMM360 can also be used to test transistors
and diodes.
Use it as voltmeter, ohmmeter or ameter. |
| Product Code: AMM360
|
$15.00 & Up
|
|
|
|
|
|
|
Spatula |
|
Stainless steel, polished spatula with one side spoon and one side flat. Available in two different sizes.
|
| Product Code: LC3568
|
$2.20 & Up
|
|
|
|
|
Cotton Paper - Cellulose Paper - 2.5 um filter paper |
|
This highly absorbent paper is made of 100% pure cotton and can filter solids as small as 2.5 um.
It is used as a high quality filter paper, chromatography paper and electrophoresis paper.
It comes in a 50cm x 50cm sheet folded to simplify shipping. You may cut it to smaller sizes and strips as you need.
|
| Product Code: P601
|
$4.50 & Up
|
|
|
|
|
Forceps |
|
Forceps, Self sprung, Transparent with blue tint. Sturdy polystyrene construction. 4.2" long (105mm).
|
| Product Code: EG1120B
|
$0.47 & Up
Special Order!
|
|
|
|
Qlk.com
