Battery Holder, Metal, D Size |
|
This is a metal battery holder that holds one D cell battery. This battery holder has two Fahnstock clips for easy connection of any solid wires from 22 AWG up to 14 AWG. This battery holder does not have any specific direction for inserting the battery. You have a choice to decide which end you would want to be positive and may reverse it as needed.
Warning: To prevent battery from overheating and subsequent discharge, turn the Fahnstock clips upward so they are not touching the metal frame.
|
Product Code: MBH1D
|
$1.18 & Up
|
|
|
|
Battery Holder, 4 AA, Plastic |
|
PBH4AAS is a square plastic battery holder that holds 4 AA batteries, connecting them in series arrangement to form about 6 V output. This battery holder has a red and a black wire lead that are about 6 inches long each. Clearly marked for the size and the direction of placing batteries. The center divider and the side walls are curved to securely hold the batteries.
|
Product Code: PBH4AAS
|
$0.85 & Up
|
|
|
|
Battery Holder, 1 D, Plastic |
|
PBH1D is a plastic battery holder that holds one D cell battery. This battery holder has a red and a black wire lead that are about 6 inches long each. PBH1D is marked with + and - signs to show the direction of placing the battery.
|
Product Code: PBH1D
|
$0.75 & Up
|
|
|
|
Battery Holder, 1 AA, Plastic |
|
This is a plastic battery holder that holds one AA battery. This battery holder has a red and a black wire lead that are about 6 inches long each. PBH1AA is marked with + and - signs to show the direction of placing the battery.
|
Product Code: PBH1AA
|
$0.47 & Up
|
|
|
|
Battery Connector, 9 V |
|
PBC9V is a battery connector for 9-volt batteries. This battery connector has a pair of red and black lead wires that are stripped and tinned 5 mm on the ends. The connector back is covered with black vinyl for additional protection and safety.
|
Product Code: PBC9V
|
$0.42 & Up
|
|
|
|
BATTERY HOLDER D CELL, Linkable |
|
Single D Cell holder with strong plastic construction.
Can be connected in series or parallel for multiple current outputs.
The size of each battery holder is about 80 x 35 x 27 (L x W x H) in millimeters.
|
Product Code: LC1929
|
$1.15 & Up
|
|
|
|
Battery Holder, 2 AA, Plastic |
|
PBH2AA is a plastic battery holder that holds 2 AA batteries, connecting them in series arrangement to form about 3 Volts output. This battery holder has a red and a black wire lead that are about 6 inches long each. Clearly marked for the size and the direction of placing batteries. The side walls are curved to securely hold the batteries.
|
Product Code: PBH2AA
|
$0.49 & Up
|
|
|
|
Battery Connector, 9-V Deluxe |
|
PBC9VD is a Delux 9-Volt battery connector with hard shell for ease of use and durability. This battery connector has a pair of red and black lead wires that are stripped and tinned 5 mm on the ends. The connector back is covered with white hard plastic for additional protection, safety and ease of use.
|
Product Code: PBC9VD
|
$0.42 & Up
|
|
|
|
Battery Holder, 4 C, Plastic |
|
PBH4CL is a long plastic battery holder that holds 4 C cell batteries, connecting them in series arrangement to form about 6 Volts output. This battery holder has a pair of red and black wire leads that are about 6 inches long each. Clearly marked for the size and the direction of mounting the batteries. The side walls are curved to securely hold the batteries.
Plastic frame measures 110mm x 54 mm x 22mm.
|
Product Code: PBH4CL
|
$1.00 & Up
|
|
|
|
Plastic Battery Holder, 4D |
|
This battery holder is for 4 D size cells in a 2x2 arrangement connected inseries in order to create 6 Volts (While individual cells are 1.5 V each).
Color coded connection wires are 15 cm (about 6 inches) long and they are stripped and tinned 4mm on ends.
Overall size is 134mm x 74mm x 32mm. It has 10 screw holes at the bottom.
|
Product Code: PBH4DL
|
$1.50 & Up
|
|
|
|
Battery Holder, 2D, |
|
PBH2D is a plastic battery holder that holds 2 D cell batteries, connecting them in series arrangement to form about 3 Volts output. This battery holder has a pair of red and black wire leads that are about 6 inches long each. Clearly marked for the size and the direction of mounting the batteries. The side walls are curved to securely hold the batteries.
|
Product Code: PBH2D
|
$1.05 & Up
Special Order!
|
|
|
|
Battery Holder, 4 AA, Plastic, Long |
|
This is a long plastic battery holder that holds 4 AA batteries, connecting them in series arrangement to form about 6 V output. This battery holder has a red and a black wire lead that are about 6 inches long each. Clearly marked for the size and the direction of placing batteries. The center divider and the side walls are curved to securely hold the batteries.
|
Product Code: PBH4AAL
|
$0.85 & Up
|
|
|
|
Battery Connector, Simple |
|
PBC9VS is a simple battery connector for 9-volt batteries without vinyl cover. This battery connector has a pair of red and black lead wires that are stripped and tinned 5 mm on the ends. The connector back is not covered so that you can see the connectors and wires attached to them. Good for educational applications.
|
Product Code: PBC9VS
|
$0.38 & Up
|
|
|
|
Plastic Battery Holder for 6 AA |
|
PBH6AADS is a compact battery holder for 9-Volt applications. Each side holds 3 AA batteries. Overall dimensions are: L:57mm x W:48mm x H:29mm.
Black and red connection wires are 6 inches long and they are stripped and tinned 3mm on the ends.
|
Product Code: PBH6AADS
|
$1.25 & Up
|
|
|
|
Plastic Battery Holder for 8 AA |
|
PBH8AADS is a compact battery holder for 12-Volt applications. Each side holds 4 AA batteries. Overall dimensions are: L:57mm x W:60mm x H:29mm.
Black and red connection wires are 6 inches long and they are stripped and tinned 3mm on the ends.
|
Product Code: PBH8AADS
|
$2.00 & Up
|
|
|
|
Battery Holder, 3 AA, Plastic |
|
PBH3AA is a square plastic battery holder that holds 3 AA batteries, connecting them in series arrangement to form about 4.5 V output. This battery holder has a red and a black wire lead that are about 6 inches long each. Clearly marked for the size and the direction of placing batteries. The center divider and the side walls are curved to securely hold the batteries.
|
Product Code: PBH3AA
|
$0.65 & Up
|
|
|
|
Plastic Battery Holder 4 AA with Snap Connector |
|
This plastic battery holder with snap connectors allows easy connection and disconnection of battery holder from your system. Snap connectors are the same as what you see in 9-volt batteries. If you need matching snap connectors please search for product code PBC.
|
Product Code: PBH4AASC
|
$2.50 & Up
|
|
|
|
D Cell Battery Holders, Linkable, Easy Plug |
|
This battery holder for D Cell batteries are made of high impact plastic and ideal for heavy classroom use. They can be connected in a series to add voltage or in parallel to add current.
|
Product Code: PBH1DL
|
$1.00 & Up
|
|
|
|
D Cell Battery Holder w/ Fahnestock Clips |
|
The battery holder is plastic. The fahnestock clips are metal terminals on each end of the holder. Fahnestock clips are flexible metals with a rectangle punched out of one end and a loop punched out of the other end. The clip is bent over itself so the loop can be pushed through the rectangular opening. A wire can be inserted through the loop and the spring force will hold the wire in place.
|
Product Code: PBH1DF
|
$1.55 & Up
|
|
|
|
Battery Holder, 2C, Plastic |
|
PBH2C is a plastic battery holder that holds 2 C cell batteries, connecting them in series arrangement to form about 3 Volts output. This battery holder has a pair of red and black wire leads that are about 6 inches long each. Clearly marked for the size and the direction of mounting the batteries. The side walls are curved to securely hold the batteries.
|
Product Code: PBH2C
|
$0.95 & Up
|
|
|
|