us by phone, call 973-777-3113.
Forward questions or comments to firstname.lastname@example.org
Plastic Cam, Set of 4
Product Code: CAMSET4
Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.
The holes are about 2.6 mm (0.1 inches) in diameter, but you can enlarge the holes using a right size drill bit.
This set includes four cams in 4 different shapes: Round eccentric cam, small Pear-shaped cam, snail cam, and large pear-shaped cam.
Notes about Cam:
Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel.
follower: The rotational movement of the cam is changed into the reciprocating movement of the follower. The follower is in a sleeve, so that it can move in one direction only.
A cam is driven by an axle, so that when the axle rotates, the cam rotates. When the cam rotates, the follower slides on the cam. The position of the follower depends on the angle at which the cam is rotated.